Control The Port Leds - NETGEAR S8000 User Manual

Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)

Control the Port LEDs

You can turn the blue port LEDs and Power LED on the switch on and off, either by
pressing the LED button on the back of the switch with the light icon next to port 8, or
by using the local browser interface.
By default, a port LED lights when you connect a powered-on device to the port. When
the switch functions with its LEDs off, we refer to it as Stealth Mode.
To control the port LEDs through the local browser interface:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. Select Port LEDs.
The Port LEDs button displays.
5. Disable or enable the port LEDs by clicking the button.
When the port LEDs are enabled, the button bar displays green. When the ports
LEDs are disabled (Stealth Mode), the button bar displays gray.
6. Click the APPLY button.
Your settings are saved.
Maintain and Monitor the Switch 92 User Manual