Rename A Custom Preset Mode - NETGEAR S8000 User Manual

Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
The PRESET MODES page displays. The LOAD tab is automatically selected.
5. Click the SAVE tab.
The SAVE PRESET MODES page displays.
6. In the Preset Mode Name field, enter a name from 1 to 16 characters for the custom
preset mode.
7. Select the Slot 1 or 2 button.
You can save two custom preset modes, one in each slot.
8. Click the APPLY button.
Your settings are saved. The preset custom mode is displayed on the PRESET MODES
page.

Rename a Custom Preset Mode

After you save a custom preset mode, you can rename the mode.
To rename a custom preset mode:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. Select PRESET MODES.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5. Click the SAVE tab.
The SAVE PRESET MODES page displays.
6. Select the Slot 1 or 2 button.
7. In the Preset Mode Name field, enter a new name from 1 to 16 characters for the
custom preset mode.
8. Click the RENAME button.
Your settings are saved.
Optimize the Switch
Performance
33 User Manual