Dell Inspiron 8100 Solution Manual page 60

60 Ad di ng Par ts
Disconnect the computer from the electrical outlet.
3
Wait 10 to 20 seconds and then disconnect any attached devices.
4
Remove any installed PC Cards, batteries, and devices.
5
To ground yourself, periodically touch an unpainted metal surface on
6
the back of the computer while you work.
Handle components and cards by their edges, and avoid touching pins
7
and contacts.
Turn the computer over, and remove the screw from the Mini PCI card
8
cover.
Place your finger under the cover at the indentation and lift and slide
9
the cover open.
screw
If a Mini PCI card is not already installed, go to step 11. If you are
10
replacing a Mini PCI card, remove the existing card:
To release the Mini PCI card, spread the metal securing tabs until
a
the card pops up slightly.
Disconnect the Mini PCI card from the wiring harness or internal
b
antenna, if present.
Lift the Mini PCI card out of its connector and disconnect any
c
attached cables.
Mini PCI card cover