Ad di ng Par ts
Replacing the Palm Rests
Save and close any open files, exit any open programs, and shut down
the computer (see page 18).
If the computer is connected (docked) to an advanced port replicator
(APR), undock it (see page 55).
Keep the display open, and tilt the computer back so that you can
access the bottom of the computer.
Slide and hold the latch release on the left side, and remove any device
installed in the media bay.
Slide and hold the latch release on the right side, and remove any
battery installed in the battery bay.
Locate the indentation under each palm rest, place your thumbs on
the indentation, and push to release the palm rests.
Remove the palm rests.
To replace the palm rests, insert the tabs on the edge of the palm rest
into the slots and then press down until you hear a click.
Repeat the process on each side.
bottom of computer