Click Finish when Windows displays a message that the driver is
Click Yes to restart the computer.
After the computer restarts, Windows modifies settings, creates a
Dock 1 configuration, and then displays a
Updated display settings
If necessary, consult your network administrator for instructions on
configuring the network adapter settings.
Setting Up the APR for Windows 2000
Do not install the drivers from the CD that is shipped with the APR.
The network adapter will not work if they are installed.
If the computer is on, shut down the operating system and turn off the
computer (see page 18).
Disconnect all external devices from the APR.
Insert the computer into the APR.
Attach the network cable and the AC adapter to the APR.
Turn on the computer.
Log on as a user with administrative privileges.
Make sure that Intel 3Com PCI Ethernet Adapter (10/100) appears
in the Found New Hardware window.
Windows 2000 automatically installs the network adapter drivers.
Setup is complete
message appears, click OK.
Se ttin g U p