Dell Inspiron 3700 Reference And Troubleshooting Manual page 92

4-10 Dell Inspiron 3700 System Reference and Troubleshooting Guide
3. Click the Start button, point to Settings, and then click Control Panel.
The Control Panel window appears.
4. Double-click the Display icon.
The Display Properties window appears.
5. Click the Settings tab.
6. Click the Display Type button.
The Display Type window appears.
7 . In the Adapter Type box, click the Change button.
8. The Change Display window appears.
9. Click the Have Disk button.
10. Verify that x:\drivers\winnt4\video is displayed in the Install from Disk
box, where x is the drive letter of your CD-ROM drive, and then click OK.
The CD-ROM drive letter is usually D.
11. When the Change Display window appears, verify that the ATI option is
highlighted, and then click OK.
A progress bar is shown while the driver files are copied to your hard-disk drive.
After the drivers are successfully installed, the Installing Driver window
appears.
12. Click OK in the Installing Driver window.
13. Click the Close button in the Display Type window, and then click the Close
button in the Display Properties window.
14. To activate the drivers, remove the System Software CD from the CD-ROM drive,
and restart your computer.
Dell provides a power management utility that helps you conserve battery power
and view available power levels. To install the power management utility, perform the
following steps:
1. Save your work in all open application programs, because you will need to restart
your computer at the end of this procedure to complete the installation.
2. Insert the System Software CD into the CD-ROM drive.
3. Click the Start button, and then click Run.
The Run dialog box appears.