Using The Handset; Using The Speakerphone; Using The Headset; T O Puta Call On Hold - Yealink SIP-T57W Quick Start Manual

Yealink SIP-T57W
Quick Start Guide
Ending a Call
U H
SING THE ANDSET
1. Hang up the handset or press the End Call soft key
U S
SING THE PEAKERPHONE
1. Press
U H
SING THE EADSET
1. Press the End Call soft key
Redialing a Call
1. Press to enter the Placed Calls list, press
2. Press twice when the phone is idle to dial out the last dialed number
Muting and Un-Muting A Call
1. Press to mute the microphone during a call
2. Press again to un-mute the call
Holding and Resuming A Call
T P A C
O UT ALL ON
1. Press or Hold during an active call
T R A C
O ESUME ALL
1. If there is only one call on hold, press
2. If more than one call is on hold, press
Resume
©2020 Peachtree Communications, Inc.. All rights reserved. PeachComm and the PeachComm family of marks
and logos are trademarks of Peachtree Communications, Inc.
or End Call soft key
H
OLD
,
DO ONE OF THE FOLLOWING
or to select the desired entry, and then press or Send
:
or Resume
or to select the desired call and then press or
4