Table of Contents
Advertisement
SHARED-RAIL CONFIGURATION
Shared-Rail Installations require one grounding point per array.
1
Fasten grounding lug to the Rail. Torque as
per manufacturer requirement. Figure 47 is
for reference.
2
Insert #6 AWG – RW75 uninsulated copper
ground wire into grounding lug. Torque as
per manufacturer requirement.
Rev.1, Sep 2019
Figure 46 – Shared-Rail Grounding Scheme
Figure 47 – Grounding Lug Placement
Figure 48 – Copper Wire through Grounding Lug
Page 31 of 38
Advertisement
Table of Contents
