KB Racking BARN RACK 2.0 Installation Manual page 3

Only qualified professionals should install solar modules, DC cabling, and any anti-
lightning safety devices.
KB Racking components may have shifted during shipping. Take extra care when moving
®
and unpacking components.
Seulement les professionnels qualifié devrait installer les panneaux solaires, les fils CC, et
les dispositifs de sécurité contre la foudre.
Les composants de KB Racking
précautions supplémentaires lorsque vous déplacez et déballage les composants.
FALL SAFETY
While installing the PV system, proper safety equipment should be worn. If roof/building
edge has a fall distance of 10ft (3m) or greater, appropriate safety measures must be taken
(i.e. harnesses) for installation of modules closer than 6.5ft (2m) to roof edges or skylights.
INSTALLER'S RESPONSIBILITY
It is the installer's responsibility to:
 Wear and correctly use proper safety equipment.
 Ensure the correct type and quantities of parts have been delivered.
 Inspect all components prior to installation.
 Store parts in a secure, dry location prior to, and during installation.
 Maintain proper rooftop drainage.
 Mount the racking system over a fire resistant roof covering rated for the
application.
 Ensure that the racking system is installed in accordance with the provided
instructions.
Rev.1, Sep 2019
SAFETY
peuvent ont déplacé au cours du transport. Prendre des
®
Page 3 of 38