Table of Contents
Advertisement
OPERATION
•
Before the solar sensor light can operate to its full capacity, the solar panel needs
to be in sunlight for three days to fully charge the battery. Turn the switch to the
"off" position. After the charge, turn the switch to "on" position.
•
Turn the switch to "on" position, the light will turn on automatically at night when
motion is detected by the motion detector head (6).
Charging the battery
1.
The battery charges via sunlight to the solar panel.
2.
The "On" / "Off" switch (8) controls the light. Whether off or on, the solar panel will
still charge if in sunlight, but the light will only function when switched to "On".
3.
When charging, the solar panel should be facing toward the sun. If the solar panel
is dirty, it cannot charge the battery efficiently.
How to use the On/Off switch
Inside position
OFF
When you do not need lighting.
Outside position
ON
Light turns on automatically.
Advertisement
Table of Contents
