Table of Contents
Advertisement
How to use Control Knobs
•
The solar sensor light has 3 different control knobs: LUX, TIME and SENS.
LUX (Light level for motion detection)
1.
The LUX adjusting knob (10) tells the sensor the level of darkness that must be
reached before the light turns on.
2.
If set to the maximum
dark to daylight.
3.
If set to the minimum setting
dusk or when it is dark out. This is the ideal position for general evening and night
operation. If the solar sensor light is not operating at night due to interference from
a streetlight or other interference, turn the LUX knob towards
Time
1.
The time adjusting knob (12) sets the duration of time that the light should stay lit
after motion is no longer detected in the field of vision.
2.
The time is adjustable from 8 seconds to 2 minutes. Moving the knob clockwise will
make it stay on longer.
level, the light will go on in most situation ranging from
the sensor will only trigger the light to turn on at
.
Advertisement
Table of Contents
