SAFETY & WARNINGS • Do not install this light in a location with close proximity to people or vehicles. • Keep children and infants away from the light. • Do not install this light in a location near flammable items. •...
INSTALLATION NOTES The light should be set up at a location where you desire to have extra lighting to detect persons or objects moving at night or in the dark. Decide an idea location prior to installing. Decide where you want to place both the lamp (1) and solar panel (2). The light is equipped with 5 metres of connecting wire, so the lamp (1) and solar panel (2) can be installed up to 5 metres apart.
OPERATION • Before the solar sensor light can operate to its full capacity, the solar panel needs to be in sunlight for three days to fully charge the battery. Turn the switch to the “off” position. After the charge, turn the switch to “on” or “auto” position. •...
Page 7
How to use Control Knobs The solar sensor light has 2 different control knobs: LUX and Time. LUX (Light level) The LUX Adjusting Knob (11) tells the sensor the level of darkness that must be reached before the light turns on. If set to the maximum level, the light will go on in most situation ranging from dark to daylight.
CLEANING & CARE When storing your “Solar Sensor Light” indoor for more than 2 or 3 days, turn the switch to “off”. Store the light in a dry location free of dust and debris. Make certain that the light is out of reach of children. The light must be fully charged 5 days and switch “off”...
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...