Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kogan NBLTFSLM25A
Summary of Contents for Kogan NBLTFSLM25A
- Page 1 SOLAR POWERED MOTION SENSOR LED COMPACT FLOOD LIGHT (2500MAH) NBLTFSLM25A...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS • Do not install this light in a location with close proximity to people or vehicles. • Keep children and infants away from the light. • Do not install this light in a location near flammable items. •... -
Page 4: Product Overview
PRODUCT OVERVIEW Lamp ON/OFF Switch Solar Panel (1.8m wire) Battery Housing inlet 10 Solar Panel Mounting Bracket Expansion screw LUX Adjusting Knob 12 SENS Adjusting Knob Battery Housing 13 TIME Adjusting Knob Motion Detector Head 14 Lithium Battery (not shown) “U”... -
Page 5: Installation Notes
INSTALLATION NOTES The light should be set up at a location where you desire to have extra lighting to detect persons or objects moving at night or in the dark. Decide an idea location prior to installing. Decide where you want to place both the lamp (1) and solar panel (2). The light is equipped with 5 metres of connecting wire, so the lamp (1) and solar panel (2) can be installed up to 5 metres apart. -
Page 6: Operation
OPERATION • Before the solar sensor light can operate to its full capacity, the solar panel needs to be in sunlight for three days to fully charge the battery. Turn the switch to the “off” position. After the charge, turn the switch to “on” position. •... - Page 7 How to use Control Knobs • The solar sensor light has 3 different control knobs: LUX, TIME and SENS. LUX (Light level for motion detection) The LUX adjusting knob (10) tells the sensor the level of darkness that must be reached before the light turns on.
- Page 8 SENS (Sensitivity) Sensitivity is affected by distance conditions. In the hot outside, the sensor has difficulty in detecting changes in heat. In cold temperatures, the sensor has easily to detecting changes in heat. Minimum SENS Position Turn the dial counterclockwise to the minimum setting. Ideal for short distance conditions. If the sensitivity is a tripping nuisance, it can be reduced by turning the knob counterclockwise towards the minimum setting.
-
Page 9: Cleaning And Care
CLEANING & CARE When storing your “Solar Sensor Light” indoor for more than 2 or 3 days, turn the switch to “off”. Store the light in a dry location free of dust and debris. Make certain that the light is out of reach of children. The light must be fully charged 5 days and switch “off”... -
Page 10: Specifications
SPECIFICATIONS Solar panel Polycrystalline solar panel 5.5V, 1 Watt Battery Lithium battery, 18650, 1500mAh, 3.7V, 1PC SMD2835 62PCS Light source (48pcs: 6000k, 14pcs: 3000k） Lightness 500LM Dim Lighting 8 hours, 60minutes Lighting time Total lighting after 10 hours fully charged Lighting 6-8m sensitivity... - Page 11 NOTES...
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...