Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kogan NBLTFSLM12A
Summary of Contents for Kogan NBLTFSLM12A
- Page 1 SOLAR POWERED MOTION SENSOR LED FLOOD LIGHT NBLTFSLM12A, NBLTFSLM10A...
-
Page 3: Safety And Warnings
• It the product or its power supply experiences any fault or damage, stop usind it and contact Kogan.com. Battery is not replaceable. Please dispose the batteries according to the local laws and regulations of your region. Some batteries may be recycled and may be accepted for disposal at your local recycling centre. - Page 4 ASSEMBLY Solar Panel Wall or Deck Mounted Secure bracket to solar panel with screw provided as shown in Fig 5. Set bracket on surface and secure in place with larger screws provided as shown in Fig 6. Adjust angle of solar panel to ensure it receives optimum sunlight. Note: The solar panel is equipped with a 5-metre power cord so both units can be installed up to 5 metres apart.
-
Page 5: Installation
INSTALLATION Lamp Use 'U' shaped mounting plate located to the rear of the lamp to mark where you want to install the lamp (7) Fig 1. Make sure this is clear of obstacles such as cables. Secure lamp to the wall with screws provided. Carefully route the power cord from the solar panel to the lamp and plug it into the battery housing input. - Page 6 Parts Lamp Solar panel Expansion screw 100 LEDs Battery housing Motion detector head U-Shaped mounting plate ON/OFF/AUTO switch Battery housing outlet 10. Solar panel mounting bracket LUX (Light sensitivity) dial (see Fig 7) 12. SENS dial (see Fig 7) 13. Time dial (see Fig 7) 14.
-
Page 7: Operation
OPERATION Located on the front of the light there is a switch with 3 positions. (8) (see Fig 4) • “Auto”- When the switch is the Auto position, the solar security light will turn on automatically at night once motion is detected •... - Page 8 This is the level of darkness reached before the light turns on. If set to maximum level, the light will turn on in most situations, ranging from dusk to daylight. If set to minimum the sensor will only trigger when it is dark. This is the most ideal position for general evening and night operation.
-
Page 9: Cleaning And Care
CLEANING & CARE To maintain maximum illumination, always keep the solar panel clean and free from dust and debris. Do not use any solvents or cleaning agents on the solar panel. If cleaning is required, please use a soft damp cloth or paper towel. For long-term storage, charge the battery for 2-3 days before removing the battery pack and storing the light and battery in a cool, dry environment. -
Page 10: Troubleshooting
TROUBLESHOOTING If the solar security light does not illuminate when movement in front of the sensor is obvious, check the following: • Ensure that the solar panel is in a location where it will receive maximum sunlight during daytime hours. •... - Page 11 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...