Advertisement
Available languages
Available languages
DPA/TCX
en
Thermocouple
Temperature*
Measurement
°C
*Automatic CJC
•Operation
General
The DPA/TCX allows you to set two independent trip points against
the temperature measured by a thermocouple. The units feature
automatic CJC to compensate for variations in ambient temperature.
They are specially built to suit a particular temperature range and
thermocouple type.
Setup
The alarm relay coils operate according to each setpoint/deadband
configured via front panel multiturn potentiometers. Internal push
fit jumpers determine the alarm type (high or low acting) and coil
energisation (normally energised/de-energised).
Power
Supply
DPA/TCX block diagram.
Alarm 1
Alarm 2
1
Advertisement
