Panasonic ES‑LV5C Operating Instructions Manual page 30

While using
The remaining battery
capacity are shown and
then turn off after
5 seconds.
• Approximate amount of
battery capacity is
displayed as 20 ‑ 100.
• The shaving sensor
lamp ( ) blinks.
• The charge status lamp
( ) glows and then turn
off after 5 seconds when
using cord shaving.
When the battery capacity is low
"20" blinks when operating the shaver.
The appliance beeps twice after switched off.
• You can shave 2 to 3 times after "20" blinks.
(This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
30
After use
The remaining battery
capacity blink and then
turn off after 5 seconds.
• Depending on the beard thickness or the amount of
beard trimmings in the shaver head, the shaving
sensor may not react and the driving sound may not
change. This is not abnormal.
• To prevent erroneous operation, place your fingers on
the finger rest while using the shaver.
• The sonic vibration cleaning mode is activated when
the power switch is pressed for more than 2 seconds
while the shaver is not operating (the switch lock is
unlocked). (See page 32.)
You cannot shave in this mode.
Locking/unlocking the power switch
Locking the power switch
1. Press once 2. Press
and then release. than 2 seconds
• The shaver until the switch
starts lock lamp ( )
operating. turns on.
• The shaver will
stop operating.
for more 3. Release .
• The switch
lock lamp
( ) will
light up for
5 seconds
and turn off.