Dell Dimension 4300 Solution Manual page 85

2H930bk1.book Page 85 Tuesday, November 20, 2001 5:02 PM
FILE LOCATION: C:\Projects\Green_Lantern_solutions\2H930c31.fm FILE LOCATION: FILE LOCATION: FILE LOCATION:
To remove the drive-bay cover panel, press the four tabs and pull the
7
insert away from the panel.
securing tabs (4)
front-panel insert
securing tab
drive-bay cover panel
Remove the two short, green plastic rails from the inside of the drive
8
cage.
These rails are not attached to the drive cage with screws. To remove
the rails, firmly pull the rails from the drive cage.
Attach the rails to the drive using the two captive screws on each rail.
9
Ensure that the rail tabs are positioned at the back of the drive.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 0 / 0 1 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 0 / 0 1 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 0 / 0 1 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 0 / 0 1
remove front panel
insert through here
front panel insert
Addi ng Pa rt s 85