Table of Contents
Advertisement
INSTALLATION (continued)
INPUT AND OUTPUT CONNECTIONS
1. Input connections are made directly to the unit's 3 pole main input circuit breaker and input ground
lug provided. Note the bottom access wire run route illustrated below.
2. Output connections are made directly to the output breaker(s) and output neutral and ground bus
provided. The load current is not to exceed 80% of the output breaker(s) rating, and not to exceed
the rated total current.
TVSS
(MOUNTED TO MID-PANEL)
66.000
167.64 cm
63.000
160.02 cm
FRONT VIEW
BREAKER
TVSS
60A
400V
OUTPUT
80A
BREAKER
400V
OUTPUT
BREAKER
NEUTRAL & GROUND OUTPUT
TERMINALS CONSIST OF
PK9 GROUNDING BAR
WIRE: 14 AWG. - 4 AWG.
& TA 2/0 LUG
WIRE: 14 AWG - 2/0 (2.5mm
INPUT BREAKER
(CUSTOMER'S INPUT
CONNECTS TO TOP)
MONITOR ALERT LIGHTS
BYPASS SWITCH
AIR
INLET
13
(2.5mm
- 25mm
)
2
2
- 50mm
)
2
2
1402-001
Advertisement
Table of Contents
