How To Program For Auto Brewing - Chefman RJ14-12-SQ User Manual

OPERATING INSTRUCTIONS

HOW TO PROGRAM FOR AUTO BREWING

Enjoy a fresh-made pot of coffee as soon as you wake up by programming the
brewing to start automatically at your choice of time up to 24 hours in advance.
1. Before programming, be sure current time is set correctly on the coffee
maker.
2. Prepare coffee maker with ground coffee and water as if you are going to
brew right away; do not press On.
3. Press the Prog button, then set the time you want coffee to begin brewing
by using the Hour and Min buttons. Once auto-brew time is set, a green
light will illuminate above the Hour button and the word Auto will appear
in the time display. Your coffee maker will automatically begin brewing at
the pre-set time. When the brew cycle begins, the blue light will flash to
indicate the coffee maker is in brewing.
NOTE: To check auto-brew time, press the Prog button. To cancel auto
brewing, hold the Prog button down until the word Auto disappears from
the display, about 3 seconds.
10