Husqvarna LB 548 i Workshop Manual page 30

7.9.7 To remove the fans and the air filters
To remove and install the power unit on
1. Refer to
page 25 , To remove the cover from the power unit
on page 26 , To remove the battery control box on
page 28 and To remove the battery box on page 29 .
2. Remove the 6 screws.
30 - Repair instructions
3. Remove the 2 screws (A) and remove the cover (B).
F
E
E
C
D
4. Pull up the fans (D) and the air filters (C).
5. If it is necessary, remove the brackets (E) and (F).
A
A
B
C
D
1410 - 001 -