Husqvarna LB 548 i Workshop Manual page 26

6. Remove the blade, refer to
the blade on page 20 .
7. Remove the 4 bolts and remove the power unit from
the chassis.
8. Install the power unit in the opposite sequence.
26 - Repair instructions
To remove and replace
7.9.2 To remove the cover from the power unit
1. Remove the power unit from the chassis. Refer to
To remove and install the power unit on page 25 .
2. Turn the power unit with its top down on a piece of
cloth to prevent damages to the cover.
3. Remove the 8 screws that keep the cover attached
to the baseplate.
4. Turn the power unit with its top up and open the
battery hatch.
1410 - 001 -