Husqvarna LB 548 i Workshop Manual page 27

5. Remove the 6 screws.
6. Remove the cover from the power unit.
1410 - 001 -
7.9.3 To remove the motor control box
To remove and install the power unit on
1. Refer to
page 25 and To remove the cover from the power
unit on page 26 .
2. Loosen the screw and push the plastic plate to the
side. Pull up the cables and disconnect them.
3. Loosen the screw and push the plastic plate to the
side.
Repair instructions - 27