Prior To Use - Motorola CARE MBP66N User Manual

3. PRIOR TO USE

• The key to obtaining accurate readings is a clean sensor. To clean
the sensor, use a cotton swab slightly moistened with alcohol to
gently wipe its surface, and then immediately wipe dry using a clean
cotton swab. Wait at least 20 minutes to make sure that the sensor is
completely dry before taking temperature.
• Skin surface lipids on the forehead may cause an inaccurate
measurement, so make sure the forehead is clean. If you clean the
forehead, please keep waiting a further 5 to 10 minutes before
measuring.
• If the temperature of the storage area differs greatly from that of the
measuring area, please wait until the thermometer temperature has
equalized to the room temperature, about 30 minutes, prior to use.
• Gently slide the battery cover back and install 2 x 1.5V AAA size
alkaline batteries (which can be found inside the packaging)
according to the proper polarity, slide the battery cover back, press
the button to turn the thermometer on.
8 Prior To Use