Prior To Use - Motorola MBP70SN User Manual

3. PRIOR TO USE

1. The key to obtaining accurate readings is a clean sensor. To clean the
sensor, use a cotton swab slightly moistened with alcohol to gently wipe
its surface, and then immediately wipe dry using a clean cotton swab. Wait
at least 20 minutes to make sure that the sensor is completely dry before
taking temperature.
2. Skin surface lipids on the forehead may cause an inaccurate measurement,
so make sure the forehead is clean. If you clean the forehead, please keep
waiting a further 5 to 10 minutes before measuring.
3. If the temperature of the storage area differs greatly from that of the
measuring area, please wait until the thermometer temperature has
equalized to the room temperature, about 30 minutes, prior to use.
4. Please open the battery cover and install 2 AAA batteries, which can be
found inside the packaging. Once batteries are installed, the thermometer
will then turn on automatically and the LCD display will appear as in the
figure to the right. Press any button to turn the device back on when it
turns itself off.
10 Prior To Use