Graco Contractor FTx Instructions-Parts List Manual page 14

FILTERS
3000 psi (210 bar) Maximum Working Pressure.
Adequate filtering is important for a good surface finish
and to minimize tip clogging. Elements are available in
various mesh sizes.
Filter elements and assemblies
224455 Two, 50 mesh elements, (179731)
224456 Two, 100 mesh elements, (179732)
218131 50 mesh filter assembly; includes spring,
50 mesh element and two spring retainers
218133 100 mesh filter assembly; includes spring,
100 mesh element and two spring
retainers
TOOLS
Nylon Brushes
Use to thoroughly clean the gun's fluid passages.
101891 0.375" (9 mm) dia.
101892 0.625" (16 mm) dia.
Wrench 171147
Fits all hexes on the gun.
TIP GUARDS
These tip guards fit all Graco airless spray guns.
Choose the one that's right for your application. One of
these tip guards is included with every Graco airless
gun.
Performance Series RAC
237859
Guard.
Order SwitchTip separately. See your
distributor for available sizes.
14 308645
Accessories
220222
222674
FINE FINISH RAC TIPS
These tips provide and extremely fine finish with more
consistent material thickness. See your distributor for
available sizes.
TIP EXTENSIONS
These tip extensions extend tip from the spray gun to
spray hard to reach areas.
223390
223391
223392
HEAVY DUTY EXTENSIONS
Provides extended spraying for hard to reach
applications.
R
DripLesst
224413
224414
224415
224416
236406
Standard DripLesst Tip Guard. Order
flat tip separately. See your distributor
for available sizes.
R
Heavy Duty RAC DripLesst Tip Guard.
Order SwitchTip separately. See your
distributor for available sizes.
12 inch extension
18 inch extension
24 inch extension
12 inch extension
18 inch extension
36 inch extension
72 inch extension
Includes 18 in. and 36 in. heavy duty
extension; RAC IV dripless tip guard;
180_ directional nozzle; and 45_swivel.