Graco Contractor FTx Instructions-Parts List Manual page 11

Replace Swivel
(See Fig. 10)
Disassembly
1. Follow Pressure Relief Procedure on page 5.
2. Push up on trigger guard (12) and swing trigger
guard away from trigger (5).
3. Unscrew gun handle (6) from housing (26).
Remove filter and clean in compatible solvent.
4. Remove swivel (15), guard retainer (42) and
cushion o-ring (43).
5. Save guard retainer and cushion o-ring.
12
Fig. 10
Service
6
42
43
15
05968
Reassembly
1. Clean internal thread of handle (6).
2. Install guard retainer (42), cushion o-ring (43) and
swivel (15).
3. Apply PST pipe seal (included in Swivel Kit
238817) to external thread of swivel (15) that
connects to handle (6).
4. Install swivel (15) into handle (6). Torque swivel to
250 in-lb.
5. Engage trigger guard (12) to retainer guard (42).
308645 11