Epson EF11 Quick Setup page 3

Notices
Supplier's Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers.
We: Epson America, Inc.
Located at: 3131 Katella Ave, Los Alamitos, CA 90720
Telephone: (562) 981-3840
Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,
is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can
be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR 2.906. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Trade Name: Epson
Type of Product: LCD Projector
Model: HA23A
Marketing Name: EF11
Options:
Product name
Remote controller
Supplier's Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B external switching power supplies
We: Epson America, Inc.
Located at: 3131 Katella Avenue, Los Alamitos, CA 90720
Telephone (562) 981-3840
Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,
is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can
be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR 2.906. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Trade Name: Epson
Type of Product: AC Adapter
Model: AD10370LF
Wireless LAN Safety and Specifications
Contains wireless LAN module model: WLU5000-D101(RoHS)
This document provides safety instructions and describes the specifications. Read this
document carefully before use to ensure your safety and product performance.
Data transmission is always initiated by software, which is then passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip. Several
special packets are initiated by the MAC. These are the only ways the digital baseband
portion will turn on the RF transmitter, which it then turns off at the end of the packet.
Therefore, the transmitter will be on only while one of the aforementioned packets is
being transmitted. In other words, this device automatically discontinues transmission in
case of either absence of information to transmit or operational failure.
This equipment should be installed and operated with a distance of at least 7.9 inches
(20 cm) between the radiator and your body.
This equipment is restricted to indoor operation only.
U.S. FCC Notices
Contains FCC ID: BKMAE-WLU5000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Model
2208327 xx (x=0-9)
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. Properly shielded
and grounded cables and connectors must be used for connection to host computers
and / or peripherals in order to meet FCC emission limits.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines.
Industry Canada (IC) Notices
Contains IC: 1052D-WLU5000
CAN ICES-3 (B)/NMB-3 (B)
This device complies with Industry Canada's license-exempt RSSs. Operation is subject
to the following two conditions: (1) This device may not cause interference; and (2) This
device must accept any interference, including interference that may cause undesired
operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
Epson America, Inc. Limited Warranty
Two-Year or 12,000-hour Projector Limited Warranty
A. What Is Covered: Epson America, Inc. ("Epson") warrants to the purchaser of the
Epson product enclosed with this limited warranty statement that the product, if
purchased and operated in the United States, Canada, or Puerto Rico, will be free
from defects in workmanship and materials for a period of two (2) years from the
date of original purchase or 12,000 hours of use, whichever occurs first.
B. What Epson Will Do To Correct Problems: If your product requires service during the
limited warranty period, please call Epson at the number at the end of this statement
and be prepared to provide the model, serial number, and, if required, date of
original purchase. This line will be answered during Epson's regular support hours
(currently 6:00 to 8:00 , Pacific Time, Monday through Friday, and 7:00
am pm
4:00 on Saturday — subject to change). You may also need to provide proof of
pm
purchase if warranty coverage cannot be verified by the serial number. If Epson
confirms warranty service is required, Epson will, at its option, exchange or repair
the product without charge for parts or labor. If Epson authorizes an exchange for
the defective unit, Epson will ship a replacement product to you, freight prepaid,
as long as you use an address in the United States, Canada, or Puerto Rico. The
replacement product may be new or refurbished to the Epson standard of quality.
(The replacement product may not include promotional materials, accessories,
documentation, manuals, software, or cables.) You are responsible for securely
packaging the defective unit and returning it to Epson within five (5) working days
of receipt of the replacement. Epson requires a debit or credit card number to secure
the cost of the replacement product in the event that you fail to return the defective
one. If Epson authorizes repair instead of exchange, Epson will direct you to send your
product to Epson or its authorized service center, where the product will be repaired
and sent back to you. You are responsible for securely packaging the product and
for all postage or shipping costs to and from the Epson authorized service center.
When warranty service involves the exchange of the product or of a part, the item
replaced becomes Epson's property. If service cannot be provided on the product for
any reason and Epson no longer sells the same model, Epson will replace your product
with a model of equal or superior value. Replacement products or parts assume the
remaining warranty period of the original product covered by this limited warranty
and are subject to its 12,000-hour use limitation.
C. What This Warranty Does Not Cover:
1. Any damage caused by misuse, abuse, improper installation, or neglect; disasters
such as fire, flood, or lightning; or improper electrical currents, software, or
interaction with non-Epson products
2. Any damage caused by or any service for third-party software, applications, parts,
components, or peripheral devices added to the product after its shipment from
Epson, such as dealer- or user-added boards, components, or cables
3. Any damage caused by installing the product next to a heat source or directly in
the path of an air vent or an air conditioner
4. Damage due to excessive, continual usage
5. Damage caused by failure to properly maintain the product (see your online User's
Guide for details)
6. Service when the product is used outside the U.S., Canada, or Puerto Rico
7. Warranty service if the product label, logo, rating label, or serial number has been
removed
8. Consumables such as filters or any items that are identified as being replaceable
by the user in the product documentation (see your online User's Guide for details)
9. Loss of data
10. Installation or removal
11. Any damage from service performed by anyone other than an Epson Authorized
Servicer
12. Damage resulting from operation or storage in areas with smoke, oil, high
humidity, steam, corrosive gases or chemicals, excessive dust, vibration, or shock
13. Cosmetic damage caused by handling or normal wear and tear during use
14. Any product or parts purchased as used, refurbished, or reconditioned
to
am