Connection Description - Hisense LTDN40K320UHK User Manual

6

Connection Description

・Selecting signal input
Ｔｏ ｅｎｊｏｙ ｔｈｅ ｓｈｏｗ ｆｒｏｍ ａ ｃａｂｌｅ ｓｅｔ－ｔｏｐ ｂｏｘｅｓ ａｎｄ ｏｔｈｅｒ ｅｘｔｅｒｎａｌ ｄｅｖｉｃｅｓ， ｓｅｌｅｃｔ ｍｏｄｅ
ｗｉｔｈ ｔｈｉｓ ｄｅｖｉｃｅ ｉｓ ｃｏｎｎｅｃｔｅｄ， ｐｒｅｓｓ ｔｈｅ
ｌｏｃａｌ ｐｏｒｔ ｃｏｒｒｅｓｐｏｎｄｉｎｇ ｔｏ ｔｈｅ ｓｉｇｎａｌ ｓｏｕｒｃｅ ｉｎ ｔｈｅ Ｓｏｕｒｃｅ ｍｅｎｕ．
・Connecting an Antenna or Cable
Wired / Antenna input: It can be connected to cable networks or antenna.
• Need to switch Analog TV, Digital TV-DTMB signal, please press the
enter the setup menu, select
・Connecting a USB Device
USB: This machine has the USB standard interface, which can be connected to
standard equipment with USB1.1, USB2.0 , including hard disk, U-disk and so on.
When multifunction USB external device is a combination device, it is recommended
that you use USB 3 jack.
The total current should be no more than 1900 mA when all the USB jacks are
connected with external devices. Hisense warranty does not cover the TV damages
and issues caused by the current overload.(Only USB 3 jack supports USB 3.0 devices)
・Connecting an Ex-Speaker
COAXIAL: Use a coaxial cable to connect the TV's COAXIAL jack to the Audio
Amplifier, then connect the Audio Amplifier to the external speaker.
ｂｕｔｔｏｎ ｔｏ ｅｎｔｅｒ ｔｈｅ Ｓｏｕｒｃｅ ｍｅｎｕ， ｓｅｌｅｃｔ ｔｈｅ
Tuner to switch.
or
6
Ａｕｄｉｏ ａｍｐｌｉｆｉｅｒ
ＣＯＡＸＩＡＬ
Ｓｐｅａｋｅｒ ａｕｄｉｏ ａｍｐｌｉｆｉｅｒ ｔｏ ｂｅ ｃｏｎｎｅｃｔｅｄ．
to
ｂｕｔｔｏｎ
Ｓｐｅａｋｅｒ