BT DECTfax User Manual page 17

Alternatively you can use the
to scroll through the two-digit numbers.
Enter the telephone number you want to
3
store using the keypad. Press the
to delete incorrectly entered digits.
If you are on a PABX exchange (switchboard) you
may need to have a pause in the stored number. Use
the button for this. The pause is shown on the
R
display as
Then press
4
handset beeps and displays the stored
number. The handset returns to standby
after about 20 or 30 seconds, or you can
use the
immediately.
To change a stored number
Press the
1
Enter the two-digit memory number or scroll
2
through the stored numbers until you reach
the phone number you require.
.
to confirm the entry. The
OK
button to return to standby
Clr
or the
Using your handset
button.
or button
button
Clr
17