Table of Contents
Advertisement
Enter the old code. This should be 0000, if it
has not already been changed.
The display shows NEW CODE then
3
Enter the new code. When the 4th digit has
been entered, the display returns to standby.
To register a handset to more than one
base station
Use 'The customised method' on page 8 to
register a handset with up to 4 DECT base
stations.
A handset registered to more than one base
station will stay 'linked up' to its current base
station as long as it is in range of it. As the
handset moves out of range, it will 'link up' with
the next base station it comes into range of.
To prioritise a base station
You can set a handset to give priority to a
particular base station, so that it will always
link up to that base station first if it is in range.
Press
1
OK
the
and
station number you want to prioritise.
7
Press
2
OK
A small square in the display indicates that no base
station is prioritised.
then 7 on the handset, then use
buttons to select the base
to confirm your choice.
Additional handset functions
.
23
Advertisement
Table of Contents
