Quartet 2000 Cordless Additional Handset & Charger User Guide This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.
At a glance Aerial Extendable. Display screen/Message Centre In use light Shows number of stored messages Lights up when ringing or and all status displays. a new message is waiting. Options For navigating through the menu. Earpiece volume control Increase or decrease volume during a call.
Introduction Your BT Quartet 2000 Additional Handset and Charger is for use with the Quartet range of cordless products and is made to BT’s high standards. This guide shows you how to register your For your records Additional Handset and use the basic functions of your Quartet system.
Before you use your Quartet Additional Quartet Additional Handset and Charger, call the Handset for the first time it is important to BT Quartet Helpline on 08457 697330. have the handset batteries fully charged. We recommend that you leave the handset on the...
Page 7
Battery Low Indication When the batteries need re-charging, the display will show a ‘battery low’ symbol. Replace the handset on the charger to re-charge. Aerial Extend the aerial on the handset for optimum performance. You are now ready to register your Additional Handset with your Quartet base unit.
Registering your handset All Additional Handsets must be registered Press the button on the base BLACK with the Quartet base unit before you can use unit. it. You can have up to 3 Additional Handsets registered to your Quartet base unit, plus the BLACK BUTTON original handset purchased with the base unit.
Page 9
To register your handset to NOTE another Quartet unit If the handset is reset, the Directory memories will be erased and the handset options will return Press buttons in order shown to their original settings. If you want to re-register your Additional Handset with a different Quartet unit, the handset needs to be reset.
Using Additional Handsets Your Quartet 2000 Additional Handset, once Display symbols registered to your Quartet base unit, will operate in exactly the same way as your The following symbols may appear on your existing Handset(s). For instance, if you have handset display.
Page 11
To transfer a call to another handset You can transfer incoming calls between handsets registered to your Quartet system. When you have answered the call TRANS Press . The display shows TRANS and TRANSFER X, (X is the number of one of the handsets).
Wall mounting Your BT Quartet 2000 can be wall-mounted Remove the back panel of your Charger using the screws and wall plugs provided. as shown. Before you wall-mount your Quartet 2000 charger check that: • The wall can support the weight of the equipment.
Your handset may be out of range and you on page 14. will need to move closer to the base unit. BT can supply a REN booster to support up to 8 separate pieces of equipment connected to your line.
• If there is a power failure. amount of heat during use. Therefore, we advise against placing these If your BT Quartet base unit is connected to products on antique, veneered or wooden a PBX (switchboard), you may have to dial an surfaces as damage may occur.
Technical advice Telephones provided by BT have a REN of 1, Environment Your BT Additional Handset and Charger unless otherwise stated on the underside of should be kept free of dust, moisture, high the phone. Even where the number of...
Page 16
The goods have not been tampered with or repaired by anyone other than BT, its staff or its agents. If a fault does occur, and you bought the unit yourself, it will be repaired or replaced free of charge, provided you return it to where you purchased it and produce your receipt.