Starting The Engine; Using The Self-Propel Drive - Toro Super Recycler 21681 Operator's Manual

for damage. Make all necessary repairs before
resuming operation.
•
Before leaving the operating position, shut off the
engine and wait for all moving parts to stop.
•
If the engine has been running, it will be hot and
can severely burn you. Keep away from the hot
engine.
•
Operate the engine only in well-ventilated areas.
Exhaust gases contain carbon monoxide, which
is lethal if inhaled.
•
Check the grass catcher components and the
discharge chute frequently for any wear or
deterioration and replace them with genuine Toro
parts when necessary.
Slope Safety
•
Mow across the face of slopes; never up and
down. Use extreme caution when changing
direction on slopes.
•
Do not mow on excessively steep slopes. Poor
footing could cause a slip-and-fall accident.
•
Mow with caution near drop-offs, ditches, or
embankments.

Starting the Engine

1. Hold the blade-control bar against the handle
(A of Figure 14).
2. Pull the recoil-start handle lightly until you feel
resistance, then pull it sharply, and allow it to
return to the rope guide on the handle slowly (B
of Figure 14).
Note:
If the machine does not start after several
attempts, contact an Authorized Service Dealer.

Using the Self-Propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you (Figure 15).
Figure 14
Note:
If the machine does not freely roll backward
after self-propelling, stop walking, hold your hands
in place, and allow the machine to roll a couple of
centimeters (inches) forward to disengage the wheel
drive. You can also try reaching just under the upper
handle to the metal handle and pushing the machine
forward a couple of centimeters (inches). If the
machine still does not roll backward easily, contact an
Authorized Service Dealer.
g230459
10
Figure 15
g233423