Makita DJS800 Instruction Manual
Cordless cement shear
Hide thumbs
Also See for DJS800:
- Instruction manual (61 pages) ,
- Instruction manual (53 pages) ,
- Instruction manual (61 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DJS800
Summary of Contents for Makita DJS800
- Page 1 INSTRUCTION MANUAL Cordless Cement Shear DJS800 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DJS800 Max. cutting capacities Fiber cement material 13 mm Strokes per minute 0 - 3,000 min Overall length 379 mm Rated voltage D.C. 18 V Net weight 2.1 - 2.5 kg • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country. •... - Page 3 Avoid body contact with earthed or grounded Always wear protective goggles to protect surfaces, such as pipes, radiators, ranges and your eyes from injury when using power tools. refrigerators. There is an increased risk of elec- The goggles must comply with ANSI Z87.1 in the USA, EN 166 in Europe, or AS/NZS 1336 tric shock if your body is earthed or grounded.
- Page 4 When using the tool, do not wear cloth work Do not touch the blade or the workpiece imme- gloves which may be entangled. The entangle- diately after operation. They may be extremely ment of cloth work gloves in the moving parts may hot and cause burn your skin. result in personal injury. Avoid cutting electrical wires. It can cause serious accident by electric shock. Battery tool use and care 10.
-
Page 5: Functional Description
18. Keep the battery away from children. SAVE THESE INSTRUCTIONS. CAUTION: Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum ► 1 . Red indicator 2. Button 3. Battery cartridge... -
Page 6: Overheat Protection
Overheat protection Indicating the remaining battery capacity When the tool or battery is overheated, the tool stops automatically and the lamp blinks. In this case, let the tool and battery cool before turning the tool on again. Only for battery cartridges with the indicator Overdischarge protection This protection works when the remaining battery capacity gets low. In this situation, remove the battery from the tool and charge the battery. Switch action CAUTION: Before installing the battery car- tridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF"... - Page 7 Removing shear blades To turn on the lamp, slightly pull the switch trigger, and then release it. The lamp goes out approximately 10 NOTICE: seconds after releasing the switch trigger. Hold the blades and the sleeve not to fall from the cutting head. NOTICE: Be careful not to lose the sleeve. Remove the bolts which hold the blades. Then the blades can be removed easily.
-
Page 8: Blade Rotation
Installing cutting head Blade rotation CAUTION: Secure the cutting head firmly. The edges of the side blades can be used in four ways Otherwise the cutting head may rotate during opera- by rotating the side blades as shown in the figure. tion and cause serious injury. The time and procedure to rotate the side blades is as follows: • When inside edges of each side blades become Insert the cutting head into the tool by turning it left and rounded to about half the width, swap each side blades. right alternately. Then tighten the three bolts with the •... -
Page 9: Maintenance
Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other ► 1 . Rotation button accessories or attachments might present a risk of injury to persons. Only use accessory or attachment Cutting operation for its stated purpose. - Page 12 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885784-922 www.makita.com 20200402...