Advertisement
PARTS
1.
Grip
2.
Lid
3.
Water
4.
Slot
5.
Filter holder
6.
Paper filter #4 (not supplied)
BEFORE USING FOR THE FIRST TIME
Fill the reservoir to the max mark, and run the appliance without coffee.
FILLING
1.
Remove the carafe from the hotplate.
2.
Use the grip to open the lid, and expose the reservoir.
3.
Fill the reservoir with the exact amount of water required.
4.
Open up a #4 paper filter, and put it into the filter holder.
5.
Put 1 scoop of filter-ground coffee into the filter for each cup.
6.
Close the lid.
7.
Replace the carafe on the hotplate.
SWITCH ON
1.
Put the plug into the power socket.
2.
12:00 will blink on the display.
COFFEE NOW
1.
Ignore the clock.
2.
If you're making less than 5 cups of coffee, press the B button. A will show on the
display. It slows the brewing process, so your coffee will have the same strength as coffee
from a full carafe.
3.
Press the W button. The button will light up.
4.
Shortly afterwards, coffee will start to drip into the carafe.
5.
When it's done, the hotplate will keep the carafe warm.
6.
If you want to stop the coffee maker while it's brewing, press the W button.
STATUS LIGHT
The status light will change colour to show how fresh the coffee is.
blue = brewing / 0-30 minutes since brewing
blue (blinking) = 30-40 minutes since brewing
AUTO SHUT-OFF/SLEEP MODE
About 40 minutes after brewing finishes, the appliance will shut down.
After 15 seconds of inactivity, the appliance will go to sleep.
To wake the appliance, press the min button.
7.
Press
8.
Carafe
9.
Hotplate
10. Status light
11. Scoop
¬ Dishwasher – top rack
4
Advertisement
