Cleaning And Maintenance; Troubleshooting; Technical Data - BOMANN KG 7307 Instruction Manual

• Do not leave open the door for longer than re-
quired.
• The seal of the appliance door must be complete-
ly intact, so that the door closes properly.

Cleaning and Maintenance

Cleaning and Maintenance Cleaning and Maintenance Cleaning and Maintenance
WARNING: WARNING:
WARNING: WARNING:
• Always disconnect the appliance from the power
supply before cleaning and user maintenance.
• Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock! Risk of electric shock! Hot steam could damage Risk of electric shock! Risk of electric shock!
the plastic parts.
• The unit must be dry before restarting operation.
CAUTION: CAUTION: CAUTION: CAUTION:
• Do not use a wire brush or other sharp, abrasive
items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.
Cleaning the appliance including interior Cleaning the appliance including interior Cleaning the appliance including interior Cleaning the appliance including interior
• Clean the appliance interior, the exterior surfaces,
the accessories and the door seal regularly with
warm water and mild detergent; or with a clean,
damp microfiber cloth without cleaning agent.
• Remove the appliance content and storage it at a
cool location.
• After everything was thoroughly dried, you can
restart the operation.
Defrosting Defrosting
Defrosting Defrosting
The appliance keeps free from ice inside because of
the NoFrost System. A defrosting procedure isn´t
necessary.
Changing the bulb Changing the bulb
Changing the bulb Changing the bulb
CAUTION: CAUTION: CAUTION: CAUTION:
Do NOT NOT remove the cover of the interior light. NOT NOT
The LED light may be replaced / repaired in case of
failure / defect only by an authorized specialist.

Troubleshooting

Troubleshooting
Troubleshooting Troubleshooting
Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist
Problem Problem Cause / Action Cause / Action
Problem Problem Cause / Action Cause / Action
Unit is not ∙ Check the power supply / tempera-
working ture setting / ambient temperature.
properly or ∙ Unblock the ventilation openings,
at all install the unit freely.
Loading is too ∙ Check the temperature setting /
warm ambient temperature. ∙ Open the
door only as long as necessary.
Loud noise ∙ Check the appliance position.
during opera- ∙ See the section "Operating noise".
tion
Water on the ∙ Check the temperature setting.
unit bottom
Light does not ∙ Check the power supply.
work ∙ See "Changing the bulb".
NOTE: NOTE: NOTE: NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.

Technical Data

Technical Data
Technical Data Technical Data
Electrical conne Electrical connec c c c tion............................................ Electrical conne Electrical conne tion............................................ tion............................................ tion............................................
Power voltage: .........................220-240 V~ / 50 Hz
Power input: ...............................................1.9 A
Dimension H x W x D / Weight............................... Dimension H x W x D / Weight............................... Dimension H x W x D / Weight............................... Dimension H x W x D / Weight...............................
Appliance size: ....................177.5 x 83.3 x 74.0 cm
Net weight: ....................................approx. 99.0 kg
The right to make technical and design modifications
during continuous product development remains
reserved.
22