General Operation - Jensen CMR3710 Installation & Owner's Manual

Multimedia receiver with bluetooth featuring a 7" touch screen display
Table of Contents

Advertisement

CMR3710
OPERATION
Setup Menu
7

General Operation

From the Main Menu, press the gear icon to access the Setup menu and
adjust the following: General, Clock, Audio, Bluetooth, Display and About.
General:
• System Language - Select English or Spanish.
• Tuner Region - Select between America, Europe or Latin America.
• Beep - Turn the audible beep on or off.
• Rear Camera Delay - Select 1 second, 2 seconds, 3 seconds of Off.
• Reverse Trigger - Enable or disable this feature.
Clock:
• Mode - Select 12 Hour or 24 Hour clock settings.
• Hour - Adjust the hours for time setting.
• Minute - Adjust the minutes for time setting.
• AM/PM - Adjust the AM/PM setting.
Audio:
• Camera Audio - Turn audio from the rear camera on or off.
• Audio Level - Select preset audio levels for the following modes:
Tuner, USB, SD Card and Handsfree.
Bluetooth:
• Bluetooth - Turn Bluetooth signal on or off.
• Auto Connect - Turn auto connect feature on or off.
• Auto Answer - Turn auto answer feature on or off.
• PIN - Displays the Bluetooth PIN code.
• Name - Displays the Bluetooth device name.
Display:
• Illumination Trigger - Turn illumination trigger on or off.
• Brightness Day - Adjust 1-10.
• Gamma Day - Adjust -4 to 4.
• Panel Angle - Adjust the angle of the LED panel (1-4).
• LED RGB - Adjust color of LED lights (or set to automatic).
• Wallpaper - Select a wallpaper for the LED display.
About:
• Screen Calibration - Press to calibrate the touch screen.
• Version - Press to display the version number.
• System Reset - Press to restore unit to factory settings.
• EULA -
??? Need more info

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents