Jensen CMR3710 Installation & Owner's Manual page 17

Auxiliary Input
Front/Rear Cameras - (Optional)
Using Rear Camera
Auto Selection
Using Front Camera
Front 3.5mm Aux Input
Connect an optional audio source into the 3.5mm (front panel) input.
Select auxiliary input from the Main Menu to listen to audio.
Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).
Connect an optional rear camera to the Rear Camera inputs (Yellow RCA
connector for video and Black RCA connector for audio).
diagram for details.
Manual selection - Touch the REAR CAMERA icon from the Main Menu or
from any operational mode (when enabled) to select camera mode.
top left area on the screen to exit camera mode.
Note: The manual mode is for dedicated cameras that are ALWAYS on while
driving, it is not meant for cameras that are connected to the vehicle's reverse
light.
The unit will automatically select camera mode when connected to the reverse
lamp circuitry.
Note: The external video output is not active when using the rear camera input.
Connect an optional front camera to the Front Camera inputs (Yellow RCA
connector for video; there is no audio connection for a front camera. Refer to the
wiring diagram for details.
CMR3710 OPERATION
Refer to the wiring
Touch the
16