Table of Contents
Advertisement
Dry the drawer, lids and pump unit
9.
and put them back together.
Clean the inside of the detergent
10.
drawer housing.
Push in the detergent drawer.
11.
Appliance settings
Q
Appliance settings
Y ou can change the following settings:
A p p l i a n c e s e t t i n g s
The volume of the end signal.
■
The volume of the button signal.
■
Switching the drum care information
■
signal on/off.
You will need to activate the setting
mode in order to change these settings.
1/2/3/4...
positions on the
programme selector
Activate setting mode:
Set the programme selector to
1.
position 1. The appliance is switched
on.
Touch and hold the 0 Spin button
2.
and, at the same time, turn the
programme selector clockwise to
position 2. Release the 0 Spin
button.
The setting mode is activated and the
preset setting appears in the display
panel.
Changing the volume and drum care
information
Use the ñ Ready In button to change
the following settings at the
corresponding programme selector
positions:
2: The volume of the end signal.
■
3: The volume of the button signals.
■
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
en
41
Advertisement
Table of Contents
