Table of Contents
Advertisement
Quick Links
SP-5004VZC
1x4 4K-HDR HDMI Splitter over Single
Cat.X with HDBaseT-Lite, IR, RS-232,
PoC & Loopout
User Manual
The SP-5004VZC
PoC & Loopout
been certified for international use. However, like all electronic equipments, the SP-5004VZC should
be used with care. Please read and follow the safety instructions to protect yourself from possible
injury and to minimize the risk of damage to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
TABLE OF CONTENTS
INTRODUCTION ................................................................................................................. 1
FEATURES ......................................................................................................................... 1
PACKAGE CONTENTS ...................................................................................................... 2
SPECIFICATIONS .............................................................................................................. 3
PANEL DESCRIPTIONS ..................................................................................................... 4
IR PASS-THROUGH ........................................................................................................... 5
CONNECTION DIAGRAM ................................................................................................... 6
NOTICE............................................................................................................................... 7
WARRANTY ........................................................................................................................ 9
rev: 190314
Made in Taiwan
1x4 4K-HDR HDMI Splitter over Single Cat.x with HDBaseT-Lite, IR, RS-232,
has been tested for conformance to safety regulations and requirements, and has
Advertisement
Table of Contents
Related Manuals for Gomax SP-5004VZC
Summary of Contents for Gomax SP-5004VZC
- Page 1 PoC & Loopout has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the SP-5004VZC should 1x4 4K-HDR HDMI Splitter over Single be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
- Page 2 SP-5004VZC supports all 3D formats, the true 4K 2K video and provides two HDMI PACKAGE CONTENTS local loopouts. In addition, SP-5004VZC is also equipped with bi-directional IR pass-through path and RS-232 serial port control.
- Page 3 SPECIFICATIONS PANEL DESCRIPTIONS Front Panel Model Name SP-5004VZC Technical Role of usage 1x4 Distribution Amplifier (Splitter) HDMI compliance HDMI 2.0a HDCP compliance Video bandwidth Single-link 600MHz [18Gbps] Video support HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits) Transmission over 1080p@60 60m (198ft) [CAT5e]...
- Page 4 CONNECTION DIAGRAM HDMI LOOPOUT #2: Connect to a HDMI display with a HDMI male-male cable here HDMI Signal OUT1-4: Link to each HDMI display via a Cat-5/5e/6 cable with a HDMI over Cat.X receiver. IR PASS-THROUGH IR Extenders IR Blaster IR Receiver IR Sockets IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from the...
- Page 5 NOTICE Output (1) Power on the device 1. While connecting a new monitor to the splitter, experiencing a short period of time without display (2) Connect the Micro-USB cable between PC and device might be expected. The splitter will do Automatic EDID learning which analyzes the newly connected (3) Open firmware update software monitor to see if the EDID for the HDMI input is necessary to update! (4) Set the correct COM port and click...
- Page 6 SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the SP-5004VZC features and specifications is subject to change without further notice.
Need help?
Do you have a question about the SP-5004VZC and is the answer not in the manual?
Questions and answers