Servicing The Fuses; Drive System Maintenance; Checking The Tire Pressure - Toro Titan ZX4800 Operator's Manual

Hide thumbs Also See for Titan ZX4800:
Table of Contents

Advertisement

Servicing the Fuses

The electrical system is protected by fuses. It requires
no maintenance; however, if a fuse blows, check the
component/circuit for a malfunction or short.
Fuse type:
Main—F1 (15 A, blade-type)
Charge Circuit—F2 (25 A, blade-type)
To replace the Main (15 A) fuse, reach into the
opening in the side of the console, pull out the fuse,
and install a new 15 A fuse
Figure 46
1. Main (15 A)
To replace the Charge Circuit (25 A) fuse, locate the
fuse to the left of battery, pull out the fuse, and install
a new 25 A fuse
(Figure
Figure 47
1. Charge circuit (25 A)
(Figure
46).
2. Console opening
47).
Drive System
Maintenance

Checking the Tire Pressure

Service Interval: Every 25 hours—Check tire
Maintain the air pressure in the front and rear tires as
specified. Uneven tire pressure can cause uneven
cut. Check the pressure at the valve stem
Check the tires when they are cold to get the most
accurate pressure reading.
Inflate the front caster wheel tires to 103 kPa (15 psi).
Inflate the rear drive wheel tires to 90 kPa (13 psi).
g297599
1. Valve stem
g297598
36
pressure.
Figure 48
(Figure
48).
g000554

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Titan zx5400Titan zx60007530175301ta7530275303

Table of Contents