Table of Contents
Advertisement
Set to Yes.
MAC Address
Enter Gigaset phone MAC address. Example: 7C2F80123456. MAC address can be found
at the back of the phone.
Click on the Save button.
Registering Phone
This chapter describes how to register Gigaset phone using DHCP or HTTP.
The following topics are covered:
DHCP
HTTP
DHCP
Configure DHCP
Make sure your DHCP router is configured to use option 66 to automatically instruct phones
with the URL for auto provisioning. For more information refer to your router documentation
or contact your network administrator.
Phone first boot or user initiated reboot
Auto provisioning process will start during phone first boot or after reboot process has been
initiated by user. DHCP server will instruct the phone where from to pickup appropriate
configuration file. If everything is done as above described, you should have successfully
registered your phone to PBXware. Dial *123 to verify registration.
HTTP
Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
Enter password and click Login button.
Click on System in the left navigation menu.
Click on Security in the submenu.
Enter the following:
HTTP digest username
Enter Auto Provisioning username.
HTTP digest password
Enter Auto Provisioning password.
NOTE:
Factory default password is: admin.
Advertisement
Table of Contents
