Starting - Weber CF 3-II Hd Operating And Maintenance Manual

Mounting the water sprinkling system
Lift the water tank (1) into the frame (2).
Attach the water spray pipe (3) to the base plate.
Completely empty the water tank if there might be a frost.

Starting

Turn the short-circuit button (1) to the "ON" position.
Bring the gas lever (1) into full-throttle position.
Slide the choke lever (2) to the left (close).
Open the fuel cock (3).
Slowly tighten the handle (1) of the reversing starter (2) until
resistance is noticeable.
Allow the handle (1) to glide back into the initial position, and
then forcefully and completely pull it through with both hands.
After the engine has warmed up, slide the choke lever to
the right (open).
14
1
3
1
1
2
3
2
1
2
CF 3-II Hd