DAVIS Weather Wizard III Owner's Manual page 26

To Display an Alarm Setting
1. Press the appropriate key to display the function you desire.
For temperature you must choose between the inside and outside readings, as
each set of alarms is handled separately.
2. Press UNITS to select the desired unit of measure.
3. Press ALARM.
If you are displaying temperature, which has two alarm settings, the high alarm
setting appears first.
4. To display the low alarm setting for temperature, press ALARM again.
To Set an Alarm
1. Press the appropriate key to display the function you desire.
2. Press UNITS to select the desired unit of measure.
3. Press ALARM until the alarm setting you desire appears on the display.
4. Use ENTER to set the alarm (see "Using the Enter Key" on page 16 for instructions).
5. Press any key to exit.
Example of Setting an Alarm—Low Outside Temperature Alarm
Suppose you wanted to set the Weather Wizard III alarm to sound when the
outside temperature dropped below 40˚F.
1. Press TEMP once or twice until outside temperature is displayed.
2. If necessary, press UNITS to change to ˚F.
Using the 1˚F resolution is probably easiest, though you can set the alarm to 1˚ or
0.1˚ resolution for either Fahrenheit or Celsius.
3. Press ALARM twice to display the low alarm setting.
4. Use ENTER to set the alarm to 40˚F (see "Using the Enter Key" on page 16 for instruc-
tions).
W
L
OW
5. Press TEMP to exit.
The alarm is now set and will sound when the outside temperature drops below
40˚F.
To Silence an Alarm
Press CLEAR. The high pitched beeping sound stops, though the alarm is not
cleared. The word ALARM and the function triggering the alarm remains on
the display until alarm conditions are no longer met or the alarm is cleared.
Weather Wizard III
N LOW OUTSIDE
TEMPERATURE
NW
NE
ALARM
E
MPH
SW SE
S
O T A
UTSIDE EMPERATURE LARM
F
(E )
XAMPLE
Alarms
Page 25