Test The Network Connectivity - TP-Link Archer A8 User Manual

Chapter 12

12. 7. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
3. Enter the information:
1 ) Choose Ping
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• Tracert is used to display the route (path) your router has passed to reach the
tested host, and measure transit delays of packets across an Internet Protocol
network.
2 ) Enter the IP Address
3 ) Modify the
keep the default value.
4 ) If you have chosen Tracert, you can modify the
recommended to keep the default value.
4. Click START to begin the diagnostics.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Ping.
System > Diagnostics.
or Tracert as the diagnostic tool to test the connectivity;
or Domain Name
Ping Packet Number
of the tested host.
and the Ping Packet
Manage the Router
Size. It's recommended to
Traceroute Max TTL. It's
69