View System Log - TP-Link Archer A8 User Manual

Chapter 12
1. Tick the Enable checkbox of
2. Keep the HTTPS and HTTP port as default settings (recommended) or enter a value
between 1024 and 65535.
3. Select Specified Device
4. In the Only this IP Address
the router.
5. Click SAVE.
Devices using this WAN IP can manage the router by logging in to
IP:port number (such as http://113.116.60.229:1024).
Tips: The router's WAN IP is usually a dynamic IP. Please refer to
to log in to the router through a domain name.

12. 6. View System Log

When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the
router.
2. Go to Advanced >
3. In the Save Log section, click
Remote Management.
for Remote Managers.
field, enter the IP address of the remote device to manage
System > System Log.
SAVE TO LOCAL
http://Router's WAN
Set Up a Dynamic DNS Service Account
to save the system logs to a local disk.
Manage the Router
if you want
68