Table of Contents
Advertisement
AIR VANTAGE
566X HYDRAULIC
®
OPERATION
SAFETY INSTRUCTIONS
Read and understand this entire section
before operating your machine.
WARNING
Do not attempt to use this equipment until you have
thoroughly read all operating and maintenance manuals
supplied with your machine. They include important safety
precautions, detailed engine starting, operating and
maintenance instructions and parts lists.
ELECTRIC SHOCK can kill.
•
Do not touch electrically live parts such
as output terminals or internal wiring.
•
Insulate yourself from the work and
ground.
•
Always wear dry insulating gloves.
ENGINE EXHAUST can kill.
•
Use in open, well ventilated areas or vent
exhaust outside
•
Do not stack anything near the engine.
MOVING PARTS can injure.
• Do not operate with doors open or guards off.
• Stop engine before servicing.
• Keep away from moving parts
Only quali ed personnel should operate this equipment.
ADDITIONAL SAFETY PRECAUTIONS
Always operate the welder with the sliding door closed and
the side panels in place as these provide maximum
protection from moving parts and insure proper cooling
air ow.
RECOMMENDED APPLICATIONS
WELDER - The Air Vantage
constant current DC welding output for stick (SMAW) and TIG
(GTAW) welding. The Air Vantage
excellent constant voltage DC welding output for MIG (GMAW),
Innershield (FCAW), Outershield (FCAW-G) and Metal Core
(GMAW-C) welding. In addition the Air Vantage
can be used for Arc Gouging with carbons up to 3/8"(9.5mm) in
diameter.
566X Hydraulic is NOT RECOMMENDED
The Air Vantage
®
for pipe thawing.
WARNING
Pipe Thawing with an arc welder can cause
re, explosion, damage to electric wiring or to
the arc welder if done improperly.
The use of an arc welder for pipe thawing is not approved
by the CSA, nor is it recommended or supported by Lincoln
Electric.
GENERATOR -The Air Vantage
smooth 120/240 VAC single phase and 240V three phase output
for auxiliary power and emergency standby power.
COMPRESSOR -The Air Vantage
a compressed air supply of 60 cfm @ 100 psi (1.7 cmm @ 6.9
bar) during high idle operation.
HYDRAULIC PUMP -The Air Vantage
integrates a hydraulic pump capable of 10 gpm @ 3000 psi
(37.9 L/min @ 20.7 MPa) during high idle operation.
B-1
OPERATION
566X Hydraulic provides excellent
®
566X Hydraulic also provides
®
®
566X Hydraulic
®
566X Hydraulic provides
566X Hydraulic provides
®
®
566X Hydraulic
Advertisement
Table of Contents
