SW Comms DK280 Quick Manual

MAKING INTERNAL CALLS
MAKING EXTERNAL CALLS
RECEIVING CALLS
TRANSFERRING CALLS
RETRIEVING CALLS
HOLD CALL
RETRIEVING HELD CALL
EXCLUSIVE HOLD
RETRIEVING EXCLUSIVELY HELD
CALL
AUTOMATIC CALL BACK
AUTO BUSY REDIAL (ISDN ONLY)
Issue 2 26.11.14
DK280 Digital Display Handset
Pick up handset and press extension number.
Pick up handset, press Line key or dial 9 and telephone number.
Lift up handset.
Press CNF/TRN key, dial extension number and speak to
extension, replace handset and call goes through.
Press Line key (eg. if line is engaged).
Press HOLD once (line key will flash on all extensions and call
can be picked up from any extension).
From any extension, press the flashing line key.
Press HOLD key twice.
Press flashing line key on original handset (no other extension
can pick up exclusively held call).
Ring extension, get engaged tone, press ACB and replace
handset. LCD 'extn ACB set' when that extension becomes
free, your phone will ring three times, LCD 'extn ACB' pick the
phone up and their phone will then ring.
Ring external number, get engaged, press ABR. Your
phone will redial that number a pre-programmed amount
of times.
Quick Guide