Protection; Card Comm - ADTRAN 1200287L1 User Manual

Protection

This field lists the type of protection mode currently active.
Possible states are listed in the following chart:
Condition
Network
Circuit
None
For more information on the different types of Protection Modes, see
Chapter 7, Circuit and Network Redundancy.

Card Comm

This field displays the current state of the communication link
between the two controller cards.
communicating;
communicate with each other. If there is only one card installed,
N
61200659L1-1
Description
Both controller cards are installed and everything is
functioning properly. The unit is in full Network
Protection Mode.
Unit is in Circuit Protection Mode and everything is
functioning properly,
or
unit is in Network Protection Mode and a failure on
the network has occurred.
One controller card is installed,
or
the unit is in Circuit Protection Mode and the
secondary card has failed.
F
AILURE
-R is displayed.
ON EDUNDANT
MX2800 STS-1 User Manual
indicates that the cards are
OK
indicates that the cards are not able to
Chapter 4. Status
4-7