In Progress; All Right; Output Response Messages - ADTRAN 1200287L1 User Manual

currently supports two types of acknowledgment messages: In
Progress (IP) and All Right (OK).

In Progress

The IP acknowledgment message is usually generated as an interim
response message to indicate that a message has been received and
that the command is being executed. IP messages have the
following general format:
IP <CTAG><CR><LF>
<

All Right

The OK acknowledgment message indicates that a command has
been received and that the required action was initiated and
completed. This message has the following general format:
OK <CTAG><CR><LF>
<

Output Response Messages

Output Response messages are generated in response to received
commands and have the following general format:
<CR><LF><LF>
M
(;|>)
For the MX2800 STS-1, the
one of the following values:
•
•
When the received command is denied, the line in the message
following the
code. See the section TL1 Error Codes on page 9-13 for a
description of possible MX2800 STS-1 error codes.
61200659L1-1
<SID> <YR>-<MO>-<DAY> <HR>:<MIN>:<SEC><CR><LF>
<CTAG> <COMPLETION CODE><CR><LF>
(<UNQUOTED LINE>|<QUOTED LINE>|<COMMENT><CR><LF>)*
COMPLD - Successful execution of the received command
DENY - Denial of the received command
C
OMPLETION
MX2800 STS-1 User Manual
Chapter 9. Transaction Language 1 (TL1)
C C
OMPLETION ODE
C line will contain a 4-letter error
ODE
field will contain
9-3