Step 2: Wizard Setup Procedures - 8e6 Technologies Threat Analysis Reporter TAR Quick Start Manual

Step 2: Wizard Setup Procedures

For this step, you will need your network administrator to provide you the following infor-
mation:
• IP range and netmask of machines on the network the Threat Analysis Reporter
server will be monitoring
• R3000 IP address, and port number to be used between the R3000 and Threat
Analysis Reporter
• 8e6 Enterprise Reporter server IP address and server name, if an ER unit is con-
nected to the R3000
Access the Threat Analysis Reporter Administrator Console
A. Launch Internet Explorer.
B. In the address field, type in http://x.x.x.x:8080/8e6tar/wizard.html (in which "x.x.x.x"
represents the eth0 (LAN1) IP address entered in the Connect Network Interface
screen of the Quick Start Setup Procedures). In our example, this entry would be:
http://200.100.10.10:8080/8e6tar/wizard.html.
C. Click Go to open the Threat Analysis Reporter interface and the EULA Agreement
dialog box:
0 8 6 T a r
e hreaT nalysis eporTer
Q s G
uick TarT uide